S18 - 3/4" X 5 3/4" Inside Width (Fine Thread)

S18 - 3/4" X 5 3/4" Inside Width (Fine Thread)

$13.00$32.00

Please read product description below before ordering.
$
SKU: 8T34-5.75-SQ Categories: ,
Share: 

Important Information

3/4"Our UBolts are Fine Thread (SAE). When ordering your UBolt, the diameter you order will be the diameter of the threads. The un-threaded portion of the UBolt is approx 1/64 to 3/64 smaller in diameter.

5 3/4"Inside Width (we bend around a die this size). Some ubolts will measure slightly wider due to the rod material. When you properly torque the ubolt, normally they will tighten in to the width chosen. U-Bolts must be tightened and torqued properly using a cross pattern sequence. View the torque guide here

Selected Inside Length. This measurement can vary by 1/4" to 1/2".
Thread Length on U-Bolts are generally 1 1/2"- 3", or more depending on the length of the rod. These rods come pre-threaded so we are unable to do custom thread lengths.
If you need an exact thread length, please call us toll-free at 1-877-HITCH-IT (448-2448)

3/4" U-Bolts are Grade 8 Steel with No Finish and Fine Thread Only (SAE). Nuts, Washers, and Plates Sold Separately.

Depending on the current inventory, you will receive one of the following when ordering your ubolts:

Centermark 2.0 = Black, Clean, Dry stock finish (Cannot be coated)
Plain Oily = Plain finish with oil (basic mfg. oil)

If you plan on having these coated (hot or cold dipped galvanized, painted, etc.) please call us prior to placing your order to ensure you receive the Plain Oily. There is a comment box in the checkout where you can also state if you want plain oily.

If you would like a quote on Stainless Steel, Yellow or Clear Zinc, or Hot Dipped Galvanized please call us at 1-877-448-2448. For Stainless Steel, Zinc Coated, or Hot Dipped Galvanized orders, there is a 50 piece minimum order. Please note that Hot Dipped Galvanized is only available on Low Carbon Steel UBolt material.

Please note all ubolts will rust without proper coating. Even then, this does not guarantee that they will not rust. This depends on the amount of time they will be used and the environment they will be used in.

 

No Minimum Order
Bulk/Jobber Pricing Available

CALL (877) 448-2448

All U-Bolts are Bent to your Selected  Dimensions
and are Non-Returnable

20 Pieces Or Less Have A 1-2 Day 
Lead Time To Ship Out

ORDERS OVER 20 PIECES TAKE ADDITIONAL DAYS OR WEEKS DEPENDING ON THE SIZE OF THE ORDER

U-Bolts are sold individually - Not as sets

U-Bolt Sizes & Grades In Stock

3/8" to 9/16"  is a Grade 5 Equivalent
5/8" to 1" is a Grade 8 Equivalent

Smaller than 3/8" and larger than 1" diameter, custom bends on radius, shapes, lengths & finishes available in BULK ONLY

Contact Us

If you have any questions or comments, please feel free to call us at 1-877-448-2448 or e-mail us for specific size requirements.

Contact Us Now
usercartcross linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram